Resetting to a pre-recorded greeting
message
Use this procedure to erase your greeting
message and use a pre-recorded one.
1 MMENUN#304
2 MYESN a MOFFN
Playing back the greeting
message
1 MMENUN#303
2 To exit, press MOFFN.
Listening to messages
Using the base unit
When new messages have been recorded,
M N on the base unit flashes.
Press M N (PLAY).
R During playback, M N on the base unit
lights.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker
volume
M N
Repeat message
*1
M N Skip message
M N (STOP) Stop playback
MERASEN Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
Using the handset
When new messages have been recorded:
– “New message” is displayed.
– The message indicator on the handset
flashes slowly if the message indicator is
turned on (page 71)
1 To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2 When finished, press MOFFN.
Note:
R To switch to the receiver, press M
N.
R You can also use the MPLAYN soft key, if
displayed, to play new messages.
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Key Operation
MjN or MkN Adjust the receiver/speaker
volume (during playback)
1 or MFN Repeat message (during
playback)
*1
2 or MEN Skip message (during
playback)
3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
MPAUSEN
Pause message
*2
9 or
MSTOPN
Stop recording
Stop playback
0 Turn answering system off
For assistance, please visit http://shop.panasonic.com/support
67
Answering System for Landline
To Next Page
Loading...
Need help?
General
