2 MbN: Select the desired setting. a
MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Selecting the alert tone
Handset
1 For CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Remote voice assist
For iPhone
®
and Android
™
smartphone
users
You can use the handset or base unit to
operate the voice recognition feature of your
cellular phone (Siri
®
, Google Now
™
, or S
Voice). For example, you can speak into the
handset or base unit and command your
cellular phone to make a call.
Compatible voice recognition features
R Google Now (Android 4.0 or later)
R S Voice (Android 4.0 or later)
R Siri (iOS 8.0 or later)
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R In order to use this feature, the voice
recognition feature of your cellular phone
must be turned on.
R This feature may not be available when
your cellular phone is in use.
R This feature is limited to the spoken
commands that are recognized by your
cellular phone. For information about the
available commands, refer to the operating
instructions of your cellular phone.
R This feature may not be available when
your cellular phone is locked.
Activating remote voice assist
Handset
1 M N
R Go to step 3 in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
2 MbN: Select the desired cellular phone. a
MSELECTN
3 Wait until “Voice assist” is displayed.
R A confirmation tone sounds.
R Speakerphone is turned on
automatically.
R To switch to the receiver, press MZN.
4 Speak your commands to your handset.
R When you have finished using remote
voice assist, press MOFFN.
Base unit
1 M N
R Go to step 3 in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
2 Press MCELL 1N or MCELL 2N
3 Wait until “Voice comm” is displayed.
R A confirmation tone sounds.
R Speakerphone is turned on
automatically.
4 Speak your commands to your base unit.
R When you have finished using remote
voice assist, press MEXITN.
Note:
R For Android users: Depending on your
cellular phone, you may need to set Google
Now or S voice as your cellular phone's
default voice recognition feature. For more
information, refer to the operating
instructions of your cellular phone.
R While using this feature, you cannot use
another unit to make a cellular call using
the same cellular line.
R You cannot use this feature while talking on
a landline call.
62
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
To Next Page
Loading...
