Making cellular calls
I
mportant:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 17).
1 Dial the phone number.
R To correct a digit, press MCLEARN.
2 Press MCELL 1N or MCELL 2N.
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 48), press MCELLN
*1
on the
handset. a MbN: Select the desired
cellular phone. a MSELECTN a Press
MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
Adjusting the speaker volume
P
ress MDN or MCN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
Making a cellular call using the redial
l
ist
The last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1 MREDIALN
2 MbN:
Select the desired entry.
3 Press MCELL 1N or MCELL 2N.
Erasing a number in the redial list
1 MR
EDIALN
2 MbN: Select the desired entry. a
MERASEN
3 MbN: “Yes” a MSELECTN a MEXITN
Making landline calls
1 D
ial the phone number.
R To correct a digit, press MCLEARN.
2 MZN
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N
on the handset, then press
MZN on the base unit with the call
sharing mode on (page 48).
– If the handset is on the base unit, simply
lift it.
Making a call using the redial list
T
he last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1 MREDIALN
2 MbN: Select the desired entry.
3 MZN
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 40).
For assistance, please visit http://shop.panasonic.com/support
29
Making/Answering Calls Using the Base Unit
TGF57xUSA(en)_1201_ver031.pdf 29 1/12/2016 6:41:06 PM
To Next Page
Loading...
