Operating a Bluetooth headset
using a landline
Important:
R Refer to your headset’s operating
instructions for details.
R Some features described here may not be
available depending on Bluetooth headset.
Making landline calls with your
h
eadset
Base unit
1 P
ress your headset’s button referring to
your headset’s operating instructions.
2 Dial the phone number using the base
unit after hearing the dial tone on your
headset.
3 When you finish talking, press your
headset’s button referring to your
headset’s operating instructions.
Answering landline calls with your
h
eadset
To answer a landline call, press your
headset’s button.
When you finish talking, press your headset’s
button.
Note:
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
Call sharing between your headset
a
nd the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 48).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset’s button.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Switching between the base unit and
y
our headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
unit and handset.
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Press M
N
on the base unit.
n To switch to the base unit:
Press MZN on the base unit.
Adjusting your headset receiver
v
olume
Base unit
P
ress MDN or MCN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.
64
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
TGF57xUSA(en)_1201_ver031.pdf 64 1/12/2016 6:41:07 PM
To Next Page
Loading...
