Sub-menu 1 Sub-menu 2 Settings Code Unit
Registration Register handset
– #130 43
Deregistration
*
2
– #131
43
Deregistration
*
2
– – #131
43
Battery saving
m
ode
–
On
<Off>
#150
11
Change language Display
<E
nglish>
Español
#110
/
14
Announcement
*
1
<E
nglish>
Español
#112
/
14
Main menu: “C
ustomer support”
Operation Code Unit
Displaying customer support Web address. #680
/
–
Main menu: “B
aby monitor”
Sub-menu 1 Sub-menu 2 Settings Code Unit
On/Off
–
On
<O
ff>
#268
41
Sensitivity level
– Low
<
Middle>
High
#269 42
Main menu: “K
ey detector”
*6
Sub-menu 1 Sub-menu 2 Settings Code Unit
Search
– – #655 –
Battery check
– –
*1 If you program these settings using one of the units, you do not need to program the same item using
a
nother unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller
ID subscribers only)
To use this feature, set the date and time first (page 14).
*4 The preset melodies in this product (“Melody 1” - “Melody 10”) are used with permission of
© 2012 Copyrights Vision Inc.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If
you select a melody, you cannot distinguish lines by their ringers.
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation manual
for more information on the key detector.
*7 For models with supplied key detectors, the display shows “1:Detector1”.
*8 If you register 2 or more key detectors.
*9 Handset
*10 Base unit
For assistance, please visit http://shop.panasonic.com/support
39
Programming
To Next Page
Loading...
