Making cellular calls
Im
portant:
R The unit cannot be used to talk on 2 cellular
lines at the same time.
R Only 1 Bluetooth device can be used with
the unit at a time
*1
.
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 17).
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
1 Dial the phone number.
R To correct a digit, press MCLEARN.
2 Press MCELL 1N or MCELL 2N.
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press MINTERCOMN on the base unit.
a Select the desired handset number
on the base unit. a Press M
N on the
h
andset. a Press MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
Adjusting the speaker volume
Pr
ess MDN or MCN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
Making a cellular call using the redial
li
st
The last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1 MREDIALN
2 MbN: Select the desired entry.
3 Press MCELL 1N or MCELL 2N.
Erasing a number in the redial list
1 MRE
DIALN
2 MbN: Select the desired entry. a
MERASEN
3 MbN: “Yes” a MSELECTN a MEXITN
Making landline calls
1 Di
al the phone number.
R To correct a digit, press MCLEARN.
2 MZN
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MZN
on the base unit with the call
sharing mode on (page 55).
– If the handset is on the base unit, simply
lift it.
Making a call using the redial list
Th
e last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1 MREDIALN
2 MbN: Select the desired entry.
3 MZN
Pause (for PBX/long distance service
u
s
ers)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 47).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a MPAUSEN
2 Dial the phone number. a MZN
For assistance, please visit http://shop.panasonic.com/support
31
Making/Answering Calls Using the Base Unit
To Next Page
Loading...
