4 MbN: Select the desired setting. a
MS
AVEN a MEXITN
Turning the first ring on/off
Yo
u can choose whether the first ring sounds
when a call is received.
“Yes” : The first ring for all calls will be heard,
including calls from blocked phone numbers.
“No” (default): The first ring is muted for all
calls. If this setting is selected, the unit will
never ring for calls from blocked phone
numbers.
Handset
1 MCA
LL BLOCKN
2 MbN: “Call block” a MSELECTN
3 MbN: “One ring for blocked call”
a MSELECTN
4 MbN: Select the desired setting. a
MSAVEN a MOFFN
Base unit
1 MCA
LL BLOCKN
2 MbN: “Call block” a MSELECTN
3 MbN: “Ring once” a MSELECTN
4 MbN: Select the desired setting. a
MSAVEN a MEXITN
Viewing/editing/erasing call
block numbers
Handset
1 MCA
LL BLOCKN
2 MbN: “Call block” a MSELECTN
3 MbN: “Block a single number” or
“Block range of numbers” a
MSELECTN
4 MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
5 To edit a number:
MEDITN a Edit the number. a MSAVEN
a MOFFN
To erase a number:
MER
ASEN a MbN: “Yes” a MSELECTN
a MOFFN
Base unit
1 MCA
LL BLOCKN
2 MbN: “Call block” a MSELECTN
3 MbN: “Block a single #” or “Block
range of #” a MSELECTN
4 MbN: Select the desired entry.
R After viewing, press MEXITN to exit.
5 To edit a number:
MEDITN a Edit the number. a MSAVEN
a MEXITN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MEXITN
Note:
R When editing, press the desired dial key to
add digits and press MCLEARN to erase
digits.
Erasing all call block numbers
Handset
1 MCA
LL BLOCKN
2 MbN: “Call block” a MSELECTN
3 MbN: “Block a single number” or
“Block range of numbers” a
MSELECTN
4 MMENUN a MbN: “Erase all” a
MSELECTN
5 MbN: “Yes” a MSELECTN
6 MbN: “Yes” a MSELECTN a MOFFN
Base unit
1 MCA
LL BLOCKN
2 MbN: “Call block” a MSELECTN
3 MbN: “Block a single #” or “Block
range of #” a MSELECTN
4 MERASEN
5 MbN: “Yes” a MSELECTN
6 MbN: “Yes” a MSELECTN a MEXITN
For assistance, please visit http://shop.panasonic.com/support
39
Call Block
To Next Page
Loading...
