Note:
R We
recommend you perform a test run of
the automated call block procedure to
ensure that the automated call block
feature is set correctly.
Changing the access code
If
the unit answers undesirable calls such
robocalls even though the automated call
block function is on, change the access code
(3 digits max.). The default setting is “1”.
Handset
1 MCA
LL BLOCKN a MSELECTN
2 MbN: “Access code” a MSELECTN
3 MCLEARN
4 Enter the new access code. a MSAVEN
R If you already recorded the greeting
message for automated call block,
continue from step 4, “Recording a
greeting message for automated call
block”, page 43.
5 MOFFN
Displaying and clearing the
bl
ocked call count
The total number of blocked calls (up to
65,000) will be displayed.
Handset
1 MCA
LL BLOCKN a MSELECTN
2 MbN: “Blocked calls count” a
MSELECTN
R To exit, press MOFFN.
3 MCLEARN
4 MbN: “Yes” a MSELECTN a MOFFN
Base unit
1 MC
A
LL BLOCKN a MSELECTN
2 MbN: “Blocked count” a MSELECTN
R To exit, press MEXITN.
3 MCLEARN
4 MbN: “Yes” a MSELECTN a MEXITN
Adding to the allow name list
You can allow specific callers to pass through
by adding the caller's name to the allow name
list even if you do not know the caller's
number.
You can store up to 100 names (16 characters
max.). If the name stored in the allow name list
matches the incoming Caller ID, the unit rings.
Callers listed in the allow name list are not
required to enter the access code.
Adding allowed names from the
ca
ller list
Handset
n Wh
en a cellular phone is paired:
1 MCNCID
2 MbN: Select the desired entry. a
MSELECTN
3 MSAVEN
4 MbN: “Allow name” a MSELECTN
n When a cellular phone is not paired:
1 MCN CID
2 MbN: Select the desired entry. a
MMENUN
3 MbN: “Save allow name” a
MSELECTN
Base unit
1 MCNCI
D
2 MbN: Select the desired entry. a MSAVEN
3 MbN: “Allow name” a MSELECTN
Viewing/erasing an entry
Handset
1 MCA
LL BLOCKN a MSELECTN
2 MbN: “Allow name list” a MSELECTN
3 MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
4 MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
42
For assistance, please visit http://shop.panasonic.com/support
Automated Call Block
To Next Page
Loading...
