R Some features described here may not be
a
vailable depending on Bluetooth headset.
Making landline calls with your
he
adset
Base unit
1 Pr
ess your headset’s button referring to
your headset’s operating instructions.
2 Dial the phone number using the base
unit after hearing the dial tone on your
headset.
3 When you finish talking, press your
headset’s button referring to your
headset’s operating instructions.
Answering landline calls with your
he
adset
To answer a landline call, press your
headset’s button.
When you finish talking, press your headset’s
button.
Note:
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
Call sharing between your headset
an
d the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 55).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset’s button.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Switching between the base unit and
yo
ur headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
un
it and handset.
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Press M
N on the base unit.
n T
o switch to the base unit:
Press MZN on the base unit.
Adjusting your headset receiver
v
o
lume
Base unit
Pr
ess MDN or MCN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.
72
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
To Next Page
Loading...
