Panasonic KX-TGP500 User Manual (English)

Other manuals for Panasonic KX-TGP500

User Guide67 pages

Administrator's Guide284 pages

Manual10 pages

Quick User Guide22 pages

Get To Know Guide2 pages

Set Up And Usage Instructions12 pages

Quick Reference Guide2 pages

Configuration Guide12 pages

Quick Start Guide30 pages

Quick Guide32 pages

Questions and Answers:

N
Nicholas WongAug 30, 2025
What to do if I cannot hear a dial tone on my Panasonic Cordless Telephone?
- S
  Sabrina FieldsAug 30, 2025
  If you cannot hear a dial tone on your Panasonic Cordless Telephone, confirm the Ethernet cable is properly connected. Also, your network settings may not be correct. Resetting all equipment (modem, router, hub, base unit, and computer) may resolve the issue. If you cannot access Internet Web pages using your computer, check to see if your phone system is having connection issues in your area.
A
Amanda TerrellAug 31, 2025
What to do if I fully charged the batteries, but the battery indicator still flashes or shows zero on my Panasonic Cordless Telephone?
- E
  Elizabeth HartAug 31, 2025
  If you have fully charged the batteries of your Panasonic Cordless Telephone, but the battery indicator still flashes or shows zero, clean the charge contacts and charge again. If the issue persists, it may be time to replace the batteries.
G
gardneramberAug 31, 2025
What to do if I cannot hear a dial tone on my Panasonic KX-TGP500 Telephone?
- M
  Marc DavilaAug 31, 2025
  If you cannot hear a dial tone on your Panasonic Telephone, ensure the Ethernet cable is properly connected. Reset all equipment by shutting down your modem, router, hub, base unit, and computer, then turn them back on one at a time in that order: modem, router, hub, base unit, computer. If you cannot access Internet Web pages using your computer, check to see if your phone system is having connection issues in your area. Network settings may also be incorrect, so contact your administrator for further information.
A
Anthony WhiteSep 1, 2025
Why is the STATUS indicator on my Panasonic KX-TGP500 Telephone off?
- S
  Spencer JohnstonSep 1, 2025
  If the STATUS indicator on your Panasonic Telephone is off, it could be due to several reasons: the base unit power is off, the Ethernet cable is not connected properly, your network devices (hub, router, etc.) are turned off, or the base unit power is booting up. Check these possibilities to resolve the issue.
C
Crystal DuffySep 1, 2025
How to fix noise and sound interruptions on my Panasonic Telephone?
- A
  Alex KingSep 1, 2025
  If you hear noise or the sound cuts in and out on your Panasonic Telephone, it may be due to electrical interference. Try re-positioning the base unit and using the handset away from sources of interference. Also, try moving closer to the base unit.
B
bradleystewartSep 2, 2025
Why is the Panasonic Telephone base unit not ringing?
- J
  Jessica AlvarezSep 2, 2025
  If the base unit of your Panasonic Telephone is not ringing, the ringer volume may be turned off. Adjust the ringer volume. Call forward, Do not disturb, or Block anonymous calls may have been programmed by your administrator.
J
Julie BrownSep 3, 2025
What to do if I fully charged the batteries, but my Panasonic Telephone still flashes or displays 0?
- S
  Sean WrightSep 3, 2025
  If you have fully charged the batteries, but your Panasonic Telephone still flashes or displays 0, clean the charge contacts and charge again. It also may be time to replace the batteries.
D
Dominic LoganSep 4, 2025
Why doesn't my programmed Call forward/Do not disturb/Block caller ID/Block anonymous calls work on my Panasonic Telephone?
- J
  Juan TapiaSep 4, 2025
  If your programmed Call forward/Do not disturb/Block caller ID/Block anonymous calls do not work as expected, the features may have been programmed by your administrator, or features set on your unit may be overridden by your phone system settings. Call forward ('Busy'/'No Answer') does not work when Do not disturb is turned on.
B
Brent WilsonSep 15, 2025
What to do if the STATUS indicator is flashing amber on my Panasonic Cordless Telephone?

Panasonic KX-TGP500 Specifications

General

Wireless Technology	DECT
Frequency	1.9 GHz
Base Station Handsets Supported	6
Simultaneous Calls	3
Protocols Supported	SIP
Caller ID	Yes
Call Waiting	Yes
Conference Calling	Yes
Voicemail	Yes
Handset Speakerphone	Yes
Power	AC Adapter
Network	Ethernet
PoE	Yes
Headset Jack	2.5mm
Codecs	G.711, G.729
Display	LCD
Range	Up to 300 meters outdoors, 50 meters indoors