8
is now placed on “hold”.
Now, dial the party to whom you would like to transfer the call. To do so, enter the party’s telephone
number and press .
Wait for the other party to answer, then announce the call. This step can also be omitted, if
necessary.
Press the softkey .
1.9. Unattended call transfer
During an active call, press the menu key. (Joystick)
Now select “3=Send blind”. You can alternatively press the number “3” on your keypad. The active
call is now placed on “hold”.
Now, dial the party to whom you would like to transfer the call without making an enquiry.
Press the softkey .
2. Voicemail
2.1. Initial set-up
When accessing the voice menu of your voicemail system for the first time, you should also set up
your personal answering system.
Please refer to the voicemail leaflet for detailed information.
Press *793 on the Panasonic mobile handset to access the voice menu of the voicemail system.1.
Then select “0 Mailbox Options” to set up your voice mailbox.2.
Now press “1” to record a message in the event you are unavailable.3.
Now record your message and press “#” to end the recording.4.
Press “1” to accept the recording, “2” to replay the recording, and “3” to rerecord.5.
Use the administration portal to record custom voicemail announcements for each
extension. However, the formats must be in .mp3 or .wav format.
2.2. Accessing voicemail
Dial *793 from the Panasonic mobile handset.1.
Dial the direct dial/extension assigned on the service site for accessing voicemail.2.
To Next Page
Loading...
