Panasonic KX-TH1201 - Page 31

Temporary Confidential
Programming
31
For assistance, please visit http://www.panasonic.com/help
For landline (KX-TH1211/KX-TH1212)
*1 If “System setting” column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*3 If you select one of the melody ringer tones, the ringer tone will continue to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*4 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at “700ms” unless pressing
{FLASH} fails to pick up the waiting call.
Feature Feature
code
Setting code System
setting
*1
Page
Caller ID edit
(Caller ID number
auto edit)
{2}{1}{4}{1}: <On> {0}: Off r 39
Message alert {3}{4}{0}{1}: <On> {0}: Off –42
Ringer tone
*2, *3
{1}{6}{1}{1}–{3}: Tone <1>–3
{4}–{7}: Melody 1–4
––
Ringer volume {1}{6}{0}{1}: Low {2}: Medium
{3}: <High> {0}: Off
––
Set dial mode {1}{2}{0}{1}: Pulse
{2}: <Tone>
r 16
Set flash
time
*4
{1}{2}{1}{1}: <700ms>
{2}: 600ms
{3}: 400ms
{4}: 300ms
{5}: 250ms
{6}: 110ms
{7}: 100ms
{8}: 90ms
r 22
Set line mode
*5
{1}{2}{2}{1}: A {2}: <B> r –
Store VM
access#
{3}{3}{1} – r 41
Time
adjustment
*6
(Caller ID
subscribers only)
{2}{2}{6}{1}: <Caller ID
[auto]>
{0}: Manual
r –
V.M. access {3}{3}{0} ––42
VM tone detect {3}{3}{2}{1}: <On> {0}: Off r 41
TH12XX.book Page 31 Wednesday, December 19, 2007 4:17 PM