19
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Programming Summary
You can program the following functions from the menu. After pressing
[FUNCTION/EDIT], the main menu will be displayed first. If the main menu
item has the sub-menu, it will be displayed. See the corresponding pages
for function details.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
During programming
• To select a desired function item, scroll through the menu by pressing [] or [].
Then press
[] to go to the next step.
•“
–––––––––––––––” indicates the beginning or end of the function menu.
• You can exit the programming mode any time by pressing [EXIT].
• If you do not press any buttons for 60 seconds, the unit will exit the programming
mode.
Press [FUNCTION/EDIT].
<Main menu>
–––––––––––––––
Save M1,M2,M3 . . . . . p. 44
Save directory . . . . p. 38
LCD contrast . . . . . . p. 21
Ringer setting
Change password . . . p. 56
Dial setting
Line setting
Caller ID edit . . . . p. 35
Set clock. . . . . . . . . . p. 15
Assign EXT# . . . . . . . p. 17
–––––––––––––––
• Scroll to a desired item by pressing
[] or [], and press
[].
<Sub menu>
–––––––––––––––
Ringer volume . . . . . p. 22
Ringer pattern . . . . p. 23
Incoming call . . . . . p. 54
–––––––––––––––
–––––––––––––––
Set dial mode . . . . . p. 20
Set flash time . . . . p. 53
Call restrict . . . . . p. 58
–––––––––––––––
–––––––––––––––
Line selection . . . . p. 55
Call barge in . . . . . p. 60
–––––––––––––––
▼
▼
To Next Page
Loading...
