39
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Selecting characters to enter names
The dialing buttons ([0] to [9]) can be used to enter letters and symbols.
Pressing each button selects a character as shown below.
If you make a mistake while entering a name:
Use [] or [] to move the cursor to the incorrect character, press
[CLEAR] to delete and enter the correct character. Each time you press
[CLEAR], a character is erased.
To erase all characters, press and hold [CLEAR].
For example, to enter “Tom Jones”:
1
Press [8] four times.
2
Press [6] three times, then press [].
3
Press [6] once, then press [] twice.
4
Press [5] four times, press [6] three times,
then press [].
5
Press [6] twice, press [3] twice, then press
[7] four times.
Number of times key is pressed
Keys 1 2 3 4 5 6 7 8 9 10 11
[1]
#&’ ( ) , – . / 1
[2]
abcABC2
[3]
defDEF3
[4]
ghiGHI4
[5]
jklJKL5
[6]
mnoMNO6
[7]
pqrsPQRS7
[8]
tuvTUV8
[9]
wxyzWXYZ9
[0]
0
Space
[]
Moves the cursor to the left.
[]
Moves the cursor to the right. (To enter another character using the
same number key, move the cursor to the next space.)
▼
▼
▼
▼
▼
▼
To Next Page
Loading...
