Panasonic KX-TS3282B - Setting the Password

Special Features
56
Setting the Password
You can change the password for the dial lock (p. 57) and call restriction
(p. 58).
The factory preset password is “1111”.
To set the password
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Change password” by
pressing [] or [].
3
Press [].
4
Enter the current password.
• The factory preset is “1111”.
5
Press [] (Next key).
• If 3 beeps are heard, you entered a wrong
password. Enter the correct one.
6
Enter a new password using a 4-digit
number. (Ex. “1234” is entered.)
7
Press [ENTER] (Save key).
• A beep sounds.
• To exit the programming mode, press
[EXIT].
• You can exit the programming mode any time by pressing [EXIT].
Once you have set a PIN code, you cannot confirm it. If you forget your PIN
code, please call: 1-800-211-PANA(7262).
–––––––––––––––
Save M1,M2,M3
Save directory
▼
Ringer setting
Change password
Dial setting
▼
Current password
:––––
=Next
▼
Current password
:oooo
=Next
Enter password
:––––
ENTER=Save
Enter password
:1234
ENTER=Save