35
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Caller ID edit” by pressing
[] or [].
3
Press [].
• The current setting is displayed.
4
Select “On” or “Off” by pressing [] or
[].
5
Press [ENTER] (Save key).
• A beep sounds.
• To exit the programming mode, press
[EXIT].
• You can exit the programming mode any time by pressing [EXIT].
• When the feature is set to OFF, the unit will still be able to display Caller ID, like
regular Caller ID telephone, but the in-coming Caller ID number will not be edited
by pattern and by area codes.
–––––––––––––––
Save M1,M2,M3
Save directory
Line setting
Caller ID edit
Set clock
▼
To Next Page
Loading...
