To Next PageTo Next PageWhy can't I program items on my Panasonic KX-TS620FX?
You cannot program items on your Panasonic Telephone when the handset is off the cradle, the SP-PHONE/HEADSET indicator lights, or while viewing caller information. Also, do not pause for over 60 seconds while programming.
Why can't I operate the Panasonic Telephone answering system from a touch tone phone?
If you cannot operate the answering system of your Panasonic Telephone from a touch tone phone, ensure you are entering the correct remote code. Make sure to press each button firmly, as the answering system may not respond if the tones are too short. Also, verify that the answering system is turned on.
What happens when my Panasonic KX-TS620FX rings during programming?
If your Panasonic Telephone rings during programming or searching, interrupting the process, answer the call by lifting the handset or pressing {SP-PHONE/HEADSET}. Then, start the programming or search again from the beginning after hanging up.
Why does my Panasonic KX-TS620FX display exit the Caller List?
If the display on your Panasonic Telephone exits the Caller List, avoid pausing for over 60 seconds while searching.
General| Type | Corded Phone |
|---|---|
| Number of Lines | 1 |
| Speakerphone | No |
| Caller ID | Yes |
| Display | LCD |
| Dialing Mode | Tone/Pulse |
| Phonebook entries | 50 |
| Redial | Yes |
| Wall Mountable | Yes |
| Call Waiting | Yes |
| Ringer Volume Control | Yes |
| Handset Volume Control | Yes |
| Phonebook | Yes |
