Panasonic LAMDASH ES-TLVFE - Preparing the Shaver for First-time Use; Charging the Shaver; Charging Notes

EN9
Preparing the Shaver for First-time Use
Charging the shaver
●Set the power switch to off beforehand.
●Wipe off any water droplets on the appliance socket.
ES-TLVFE.indb 9 2019/06/18 18:34:06
Job Name 100175366_ES-TLVFE
Color
K
File Name 0010_ES-TLVFE.pdf
Refine Time
2019-06-18 18:39:22 Print Time 2019-06-26 18:33:17
Job Name
100175366_ES-TLVFE
Color K
File Name 0010_ES-TLVFE.pdf
Refine Time 2019-06-18 18:39:22 Print Time 2019-06-26 18:33:17
EN10
English
1
Insert the appliance plug into the shaver.
2
Plug in the adaptor into a household outlet.
(The charge status lamp glows)
▼
Charging is completed after approx. 1 hour.
3
When the charge status lamp turns off
Disconnect the adaptor.
Notes
● When charging the shaver for the first time or when it has not been in use for more
than 6 months, the charging time may change or the charge status lamp may not
glow for a few minutes. (It will eventually glow if kept connected.)
● If the temperature is outside the recommended charging temperature range (10
°C –
35 °C), the charging time may be longer, or may blink rapidly and charging may
fail.
● The shaver can be used for approximately 2 weeks with a full charge. (Based on one
3-minute dry-shave usages per day in an ambient temperature range of 20 °C – 30 °C.)
• Depends on beard thickness, force applied to the skin, and frequency of use of
sonic vibration cleaning mode.
● If the shaver causes noise on radios, etc. during charging/use, change the location.
ES-TLVFE.indb 10 2019/06/18 18:34:09
Job Name 100175366_ES-TLVFE
Color
K
File Name 0011_ES-TLVFE.pdf
Refine Time
2019-06-18 18:39:17 Print Time 2019-06-26 18:33:18