EN13
How to Use
continued
Shaving the beard
continued
1
Slide the trimmer
handle up to the top
position.
2
Press
and use.
■ Using the trimmer
The trimmer
stands upright
FREE
LOCK
●To return the trimmer to its
original position
Slide the trimmer handle down
while pressing the top knob.
Top knob
■ Switching the foil frame movement
●
To apply the shaver closely to the skin
(It prevents leaving beard unshaved)
●To fix the foil frame
Tips for better usage
Gently apply the cutting edge at a right angle and move it from
top to bottom slowly
Trimming sideburns Pre-shave of long
beards
FREE
LOCK
LOCK
FREE
Set to FREE Set to LOCK
Moves
Fixed
ES-TLVFE.indb 13 2019/06/18 18:34:10
Job Name 100175366_ES-TLVFE
Color
K
File Name 0014_ES-TLVFE.pdf
2019-06-18 18:39:14 Print Time 2019-06-26 18:33:19
100175366_ES-TLVFE
Color K
File Name 0014_ES-TLVFE.pdf
Refine Time 2019-06-18 18:39:14 Print Time 2019-06-26 18:33:19
EN14
English
Cleaning the shaver with water
We recommend cleaning the shaver after each use.
●Turn the shaver off and disconnect the AC adaptor.
Blink outward from
the center
1
Rinse the system
outer foil with water,
and apply hand soap
or cleaning solution
(sold separately).
[P. EN20]
2
Make foaming in
sonic vibration
cleaning mode.
(To suppress the spatter of bubbles)
① Press for more than
2 seconds.
( The sonic vibration cleaning
mode is activated.)
▼
After about 20 seconds, sonic
vibration cleaning mode stops
automatically.
●To stop in the middle of
operation,
press
.
Cleaning the Shaver
Continued to the next page
ES-TLVFE.indb 14 2019/06/18 18:34:11
Job Name 100175366_ES-TLVFE
Color
K
File Name 0015_ES-TLVFE.pdf
2019-06-18 18:39:13 Print Time 2019-06-26 18:33:19