3
Cautions in Handling
To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always
observe the following safety precautions.
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
Denotes a potential hazard that will result in serious injury or death.
Denotes a potential hazard that could result in serious injury or death.
Denotes a hazard that could result in minor injury.
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbols is used to alert users to a specific operating procedure that must be followed in order to
operate the unit safely.
This symbols is used to alert users to a specific operating procedure that must be performed carefully.
• Never look at laser beam directly, through lens or
through any other optical components. Laser beam
radiation into the eye causes blindness or serious
damage to the eye.
Not only the direct beam of laser, but also diffused
reflected beam is harmful.
• Never touch laser beam and avoid human skin, clothing and any other
flammable object from laser beam exposure directly.
Burning into deep skin might result and there is a risk of fire.
ALWAYS FOLLOW THESE IMPORTANT
SAFETY PRECAUTIONS!
To Next Page
Loading...
Need help?
General
