7
Type of manuals
For this product, the following manuals are prepared. Read each manuals and operate this product correctly and safely.
Also, save the manuals for future use.
Laser Safety Guide
This manual describes the items required for using this product correctly and safely. All users shall be required for read-
ing this manual.
Setup/Maintenance Guide
This manual describes the items required for introduction and installation of this product as well as for the maintenance
work.
• Product specifications, external dimensions
• Installation and connection method
• Signal details, I/O rating, and timing chart when I/O is used for control
• Maintenance details
Laser Marker NAVI smart Operation Manual
Instruction manual for the laser marker configuration software “Laser Marker NAVI smart”. This manual describes the
procedure and method to operate the laser marker, and the screen operations to set marking contents.
Mainly the users that operate this laser marker for actual marking procedure shall be required for reading this manual.
Serial Communication Command Guide
This manual describes the communication commands to control this product externally using the serial communication
(RS-232C/Ethernet). It describes the communication settings, communication data formats, communication commands,
and the control samples.
Mainly the machine builder and system integrator shall be required for reading this manual.
Serial Communication Command Guide: LP-400/V compatible mode
This manual describes the communication commands to control this product externally using the compatible command
format with the previous models of LP-400/LP-V series.
Mainly the machine builder and system integrator shall be required for reading this manual.
ンㄆㄇㄆㄓㄆㄏㄆ
• The PDF data of each manual is included on an attached CD-ROM “Laser Marker Smart Utility”.
• To read the PDF manual, Adobe Reader (Version X or later) of Adobe Systems Incorporated is required.
To Next Page
Loading...
Need help?
General
