Preparation/Basic “Quick Start Guide”
16
DVQX1333 (ENG)
∫ About the charging lamp
• When the charging lamp flashes
– Reconnect the USB connection cable (supplied) in a location where the ambient temperature
(and the temperature of battery) is in a 10 oC to 30 oC (50 oF to 86 oF) range, and try charging
again.
– If your PC is not capable of supplying sufficient power, charging is not possible.
∫ Charging time
When using the AC adaptor (supplied)
• The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not been
used for a long time may be longer than normal.
• When power is supplied from a computer, the power supply capacity of the computer
determines the charging time.
∫ About the power supply
If you connect the camera to a power outlet or PC while the camera is turned on, power
can be supplied via the USB connection cable (supplied).
• Insert the battery into the camera.
• [ ] is displayed on the recording screen while power is being supplied.
• In certain situations where the camera is used, such as during recording, the battery
may drain. The camera will turn off when the battery power runs out.
• Power may not be supplied depending on the power supply capacity of the PC.
• Before connecting or disconnecting the AC adaptor (supplied), turn the camera off.
• If the ambient temperature is high or power is supplied continuously, after [ ] is displayed,
the supply of power may stop. Wait until the camera cools down.
Lit red: Charging.
Off: Charging has completed.
(When charging is complete, disconnect the camera from the power
outlet or computer.)
Charging time Approx. 230 min
DC-G9BodyGH-DVQX1333_eng.book 16 ページ ２０１７年１１月１７日 金曜日 午前１１時４４分
To Next Page
Loading...
Need help?
General
