Wi-Fi/Bluetooth
100
DVQX1333 (ENG)
Setting up a connection to a PC via a wireless
access point
∫ To create a folder that receives images
• Create a PC account name (up to 254 characters) and password (up to 32 characters)
consisting of alphanumeric characters. An attempt to create a receive folder may fail if the
account name includes non-alphanumeric characters.
1 Install “PHOTOfunSTUDIO” to the PC. (P102)
2 Create a folder that receives images with “PHOTOfunSTUDIO”.
• To create the folder automatically, select [Auto-create]. To specify a folder, create a new
folder, or set a password to the folder, select [Create manually].
• For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).
Supported OS: OS X v10.5 to v10.11, macOS 10.12
Example: OS X v10.8
1 Select a folder you intend to use for receiving, then click on the items in the
following order.
[File] > [Get Info]
2 Enable sharing of the folder.
• For details, refer to the operating instructions of your PC or Help on the OS.
∫ Sending images to the PC
The connection methods described in this manual are examples. For details on other
connection methods, refer to “Operating Instructions for advanced features (PDF format)”.
1 Select the menu.
2 Select the connection method.
When using “PHOTOfunSTUDIO” (For Windows)
When not using “PHOTOfunSTUDIO” (For Mac)
Preparations:
• If the workgroup of the destination PC has been changed from the standard setting, change
the setting of this unit in [PC Connection].
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection]
Sending an image each time a recording is made
([Send Images While Recording])
Available file format: JPEG/RAW
Select and send the images ([Send Images Stored in the Camera])
Available file format: ALL format
DC-G9BodyGH-DVQX1333_eng.book 100 ページ ２０１７年１１月１７日 金曜日 午前１１時４４分
To Next Page
Loading...
Need help?
General
