59
Recording
(ENG) DVQX1333
Image Stabiliser
The camera can activate either the In-Lens Image Stabiliser or In-Body Image Stabiliser, or
it can activate both of them and reduce jitter even more effectively. (Dual I.S. Mode)
Dual I.S.2 ( , , ), which provides more effective correction, is also supported.
• The image stabilisers to be activated differ depending on your lens. The icon for the currently
activated image stabiliser is displayed on the recording screen.
¢ When [E-Stabilization (Video)] in [Stabilizer] in the [Rec] menu is set to [ON].
Applicable modes:
• When using an interchangeable lens with O.I.S. switch, stabiliser function is activated if the
O.I.S. switch of the lens is set to [ON]. ([ ] is set at the time of purchase)
When taking pictures
When recording
motion pictures
Panasonic lenses compatible with Dual I.S.
Mode
(Based on the Micro Four Thirds System
standard)
• For the latest information on compatible
lenses, please refer to our website.
• If the [ ] or [ ] icon is not
displayed on the recording screen even when
a compatible lens is used, update the lens
firmware to the latest version. (P10)
Lens + Body
(Dual I.S.)
(///)
Lens + Body
(Dual I.S.) ( / ),
5-Axis Hybrid
(/)
¢
Lenses compatible with the image
stabiliser function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
Lens or Body
(/)
Lens or Body ( ),
5-Axis Hybrid
()
¢
Lenses not compatible with the image
stabiliser function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
Body ( / )
Body ( ),
5-Axis Hybrid
()
¢
When using a Leica lens mount adaptor
(optional) or mount adaptor made by
another manufacturer
DC-G9BodyGH-DVQX1333_eng.book 59 ページ ２０１７年１１月１７日 金曜日 午前１１時４４分
To Next Page
Loading...
