83
Menu
(ENG) DVQX1333
The camera can be set up to prevent unnecessary battery consumption.
• To cancel [Sleep Mode], [Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting], perform either of
the following operations:
– Press the shutter button halfway.
– Turn off and on the camera.
• To turn the monitor/viewfinder on again, press any button.
This displays the monitor and the viewfinder screens in red. It reduces the glare on the
screens when recording in low-light environment such as at night.
1 Press 3/4/2/1 to select [ON] for the red display setting of the monitor or viewfinder
(LVF).
2 Press [DISP.] to display the brightness adjustment screen.
3 Press 2/1 to adjust the brightness, and press [MENU/SET].
[Economy]
> [Setup] > [Economy]
[Sleep Mode]
The camera is automatically turned off if the camera has not been used for
the time selected on the setting.
[Sleep Mode(Wi-
Fi)]
The camera is automatically turned off if it is not connected to a Wi-Fi
network and has not been used for 15 minutes (approx.).
[Auto LVF/
Monitor Off]
The monitor/viewfinder is automatically turned off if the camera has not
been used for the time selected on the setting.
[Power Save LVF
Shooting]
If you display the monitor using the viewfinder/monitor automatic switching
function, the camera will turn off automatically after being left idle.
[Time]
Sets the amount of time before the camera turns off
automatically.
[10SEC]/[5SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]
[Display]
Sets whether to turn off the camera automatically only while
the [Monitor Info. Disp.] screen is displayed or while any
screen is displayed.
[Night Mode]
> [Setup] > [Night Mode]
MENU
MENU
DC-G9BodyGH-DVQX1333_eng.book 83 ページ ２０１７年１１月１７日 金曜日 午前１１時４４分
To Next Page
Loading...
