105
4. Focus, Brightness (Exposure) and Colour tone Settings
Applicable modes:
You can move the AF area displayed on the viewfinder by
touching the monitor.
• Press the shutter button halfway to determine the focus position.
To return the focus position to the centre, press [DISP.] before determining the position. Press it
again to reset the size to the initial setting.
• To cancel the AF area setting when [š], [ ] or [ ] is selected, press [MENU/SET].
Specifying the AF area position with the Touch Pad
> [Custom] > [Operation] > [Touch Settings] > [Touch Pad AF]
[EXACT]
Moves the AF area of the
Viewfinder by touching a
desired position on the Touch
Pad.
[OFFSET1] -
[OFFSET7]
Moves the AF area of the
viewfinder according to the
distance you drag the touch
pad.
Operation area can be
selected from 7 areas.
Settings:
[OFFSET1] (all areas)
[OFFSET2] (right half)
[OFFSET3] (upper right)
[OFFSET4] (lower right)
[OFFSET5] (left half)
[OFFSET6] (upper left)
[OFFSET7] (lower left)
Example: When set to [OFFSET1]
[OFF] —
• [Touch Pad AF] is not available in the following cases:
– When [4K Live Cropping] is set
– When [Pull Focus] in [Snap Movie] is set to [ON]
To Next Page
Loading...
Need help?
General
