6. Stabiliser, Zoom and Flash
164
Applicable modes:
When a moving subject is recorded at night using a slow shutter and flash, a trail of light
may appear in front of the subject.
If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a trail of light
appearing behind the subject by firing the flash immediately before the shutter closes.
Preparation: Set [Wireless] in [Flash] to [OFF].
[Flash Synchro]
> [Rec] > [Flash] > [Flash Synchro]
[1ST]
1st curtain synchro
The normal method when taking pictures with the flash.
[2ND]
2nd curtain synchro
The light source appears behind the subject and picture
becomes dynamic.
• [2nd] is displayed in the flash icon on the screen if you set [Flash Synchro] to [2ND].
• When a fast shutter speed is set, the effect of [Flash Synchro] may deteriorate.
• You cannot set [ ] or [ ] when [Flash Synchro] is set to [2ND].
• The [Flash Synchro] settings also apply to an external flash. (P313)
To Next Page
Loading...
