6. Stabiliser, Zoom and Flash
150
Applicable modes:
Set the image stabiliser movement to match the recording situation.
• When using an interchangeable lens with O.I.S. switch (such as H-FSA14140), stabiliser
function is activated if the O.I.S. switch of the lens is set to [ON]. ([ ] is set at the time of
purchase.)
Image Stabiliser Settings
> [Rec]/ [Motion Picture] > [Stabilizer]
[Operation
Mode]
[]
(Normal)
Camera shake is corrected for up/down,
left/right, and rotational movements.
[]
(Panning)
Camera shake is corrected for up/down
movements.
This mode is ideal for panning (a method of
taking pictures which involves turning the
camera to track the movements of a
subject which continues to move in a fixed direction).
[OFF]
[Stabilizer] does not work. ([ ])
• When using a lens with an O.I.S. switch, set the switch to
[OFF].
[E-Stabilization
(Video)]
Jitter during motion picture recording is corrected along the vertical,
horizontal, roll, pitch, and yaw axes by making use of the In-Lens Image
Stabiliser, In-Body Image Stabiliser, and Electronic Image Stabiliser. (5-Axis
Hybrid Image Stabiliser)
[ON]/[OFF]
• The angle of view may become narrower if this is set to [ON].
MENU
To Next Page
Loading...
