43
2. Getting Started/Basic Operations
The shutter button works in two steps.
Press the shutter button halfway to focus.
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not achieved, except
when set to flash.)
• Once the subject is in focus, the focus indication is displayed.
(When the subject is not in focus, the indication flashes.)
A Shutter speed
B Aperture value
C Focus indication
Press the shutter button fully (push it in further), and
take the picture.
Shutter button (Taking pictures)
• Make sure that the camera does not move at the moment the shutter button is pressed.
• Pictures cannot be taken until focus is achieved when [Focus/Release Priority] is set to
[FOCUS].
• Even during menu operation or image playback, if you press the shutter button halfway, you
can instantly set the camera ready for recording.
F
F
To Next Page
Loading...
