165
6. Stabiliser, Zoom and Flash
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
Preparation: Set [Wireless] and [Firing Mode] in [Flash] to [OFF] and [TTL], respectively.
1 Select the menu.
2 Press 2/1 to set the flash output and then press [MENU/SET].
• You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV.
• Select [n0] to return to the original flash output.
Applicable modes:
The flash output is automatically adjusted in accordance with the exposure compensation
value.
Settings: [ON]/[OFF]
Adjusting the Flash Output
> [Rec] > [Flash] > [Flash Adjust.]
•[i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
• The [Flash Adjust.] setting also applies to an external flash. (P313)
[Auto Exposure Comp.]
> [Rec] > [Flash] > [Auto Exposure Comp.]
• For details on Exposure Compensation, refer to P111.
• The [Auto Exposure Comp.] settings also apply to an external flash. (P313)
MENU
To Next Page
Loading...
