201
9. Menu Guide
Applicable modes:
Type of optical measurement to measure brightness can be changed.
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
1 Press 2/1 to select the type of Highlight Shadow.
[Metering Mode]
> [Rec]/ [Motion Picture] > [Metering Mode]
Brightness measurement
position
Conditions
[]
(Multiple)
Whole screen
Normal usage
(produces balanced pictures)
[]
(Centre weighted)
Centre and surrounding area Subject in centre
[]
(Spot)
Centre of [i]
(spot metering target A)
Great difference between
brightness of subject and
background
(e.g. person in spotlight on stage,
backlighting)
• If you set the spot metering target on the edge of the screen, the metering may be affected by
the brightness around the location.
Not available in these cases:
• In the following case, [Metering Mode] does not work:
– When the Scene Guide Mode is set to anything other than [Panorama Shot]
[Highlight Shadow]
> [Rec]/ [Motion Picture] > [Highlight Shadow]
(Standard) A state with no adjustments is set.
(Raise the contrast) Bright areas are brightened, and dark areas are darkened.
(Lower the contrast) Bright areas are darkened, and dark areas are brightened.
(Brighten dark areas) Dark areas are brightened.
// (Custom) Registered custom settings can be applied.
MENU
MENU
To Next Page
Loading...
Need help?
General
