9. Menu Guide
212
Applicable modes:
You can record motion pictures while hearing the sounds that are being recorded by
connecting a commercially available headphones to this unit.
A Headphone socket
B Commercially available headphone
• Do not use the headphone cables with the length of 3 m (9.8 feet) or more.
• When headphones are connected, electronic sounds and electronic shutter sounds are muted.
∫ Switch the sound output method
• [Sound Output] is fixed to [REC SOUND] in the following cases:
– When in Recording Mode
– During HDMI output
– When using an external microphone
∫ Adjusting the headphone volume
1 Select the menu.
2 Connect headphones, and rotate the control dial while the recording screen is
displayed or a motion picture is being played back.
• You can also adjust the volume by touching [ ] or [ ] during playback.
To adjust the volume using the menu:
[Sound Output]
> [Motion Picture] > [Sound Output]
[REALTIME]
Actual sound without time lag.
It may be different to the audio recorded in the motion picture.
[REC SOUND]
Sound that is being recorded in motion pictures.
The audio may be output slower than the actual audio.
>
[Custom] > [Operation] > [Dial Set.] > [Control Dial
Assignment] > [ ]
: Reduce volume level : Increase volume level
> [Setup] > [Headphone Volume]
MENU
MENU
To Next Page
Loading...
