7. Metering/Exposure/ISO Sensitivity – [Metering Mode]
252
[Metering Mode]
Type of optical measurement to measure brightness can be changed.
 [ ]  [ ]  Select [Metering Mode]
[](Multi-metering)
Method in which the most suitable exposure is
measured by judging the allocation of brightness
on the whole screen.
[](Center-weighted)
Method used to perform measuring which
focuses on the center of the screen.
[](Spot)
Method used to measure the extremely small part
around the spot-metering target (A).
• When you move the AF area, the spot metering
target also moves to match.
[](Highlight-weighted)
Method used to perform measuring which
focuses on the highlighted parts of the screen to
prevent overexposure.
This is suitable for theater photography, etc.
• The standard value for correct exposure can be adjusted:
[]  [ ]  [Exposure Offset Adjust.] ([Exposure Offset Adjust.]: 550)
To Next Page
Loading...
Need help?
General
