9. Flash – Recording Using a Wireless Flash
322
*1 This cannot be selected when [Wireless FP] is set.
*2 This cannot be set when using the Flash (DMW-FL200L: optional).
[A Group]/
[B Group]/
[C Group]
[Firing Mode]
[TTL]: The camera automatically sets the
flash output.
[AUTO]
*1
: Sets the flash output on the
wireless flash side.
[MANUAL]: Sets the flash output of the
wireless flash manually.
[OFF]: The wireless flashes of the specified
group will not fire.
[Flash Adjust.]
Adjusts the flash output of the wireless flash
manually when [Firing Mode] is set to [TTL].
[Manual Flash
Adjust.]
Sets the flash output of the wireless flash
when [Firing Mode] is set to [MANUAL].
• It can be set within the range of [1/1] (full
flash output) to [1/128] in 1/3 steps.
To Next Page
Loading...
Need help?
General
