10. Recording Videos – Video Recording Settings
345
[Filtering]
When the [Rec. File Format] is set to [MOV], you can specify items such as
frame rate, resolution, and codec (YUV, Bit value, Image compression),
and just display recording quality that meets those conditions.
1 In the [Rec Quality] setting screen, press [DISP.].
2 Press 34 to select a setting item and then press or .
• Settings: [Frame Rate]/[Resolution]/[Codec]/[Variable Frame Rate]/[Hybrid Log
Gamma]
3 Press 34 to select the filtering conditions and then press or .
4 Press [DISP.] to confirm the setting.
• You are returned to the [Rec Quality] setting screen.
Clearing the filtering conditions
Select [ANY] in Step 3.
•
The filtering conditions are also cleared when you do the following:
– Change the [System Frequency]
– Select a recording quality from [Rec Quality (My List)]
• When you change recording quality using a filter, the current filtering conditions
are stored.
To Next Page
Loading...
Need help?
General
