14. Menu Guide – [Custom] Menu
561
[WB/ISO/Expo. Button]
[ISO Displayed Setting]
[Exposure Comp. Disp. Setting]
[WHILE PRESSING]/[AFTER PRESSING1]/[AFTER PRESSING2]
This sets the operation to be performed when [WB] (White balance), [ISO] (ISO
sensitivity) or [ ] (Exposure compensation) is pressed.
[WHILE PRESSING]: Allows you to change the setting while pressing and holding
the button. Release the button to confirm the settings value, and to return to the
recording screen.
[AFTER PRESSING1]: Press the button to change settings. Press the button again
to confirm the settings value, and to return to the recording screen.
[AFTER PRESSING2]: Press the button to change settings. Each press of the
button switches the settings value. (Except that of exposure compensation) To
confirm your selection and return to the recording screen, press the shutter button
halfway.
[Front/Rear Dials]
[ / ] / [ / ] / [OFF/ ] /
[ / ] / [ /OFF]
This sets the operations of the dials in the setting screen for ISO sensitivity.
Assigning [ ] lets you change [ISO Auto Upper Limit Setting].
[Cursor Buttons (Up/Down)] []/[OFF]
This sets the operations of the 34 buttons in the exposure compensation screen.
Assigning [ ] lets you set exposure bracketing.
[Front/Rear Dials]
[ / ] / [ / ] / [OFF/ ] / [ /
] / [ /OFF]
This sets the operations of the dials in the exposure compensation screen.
Assigning [ ] lets you adjust flash output.
To Next Page
Loading...
Need help?
General
