18. Materials – Message Displays
734
[Recording was cancelled due to the limitation of the writing
speed of the card]
•
The card does not meet the writing speed requirements for recording.
Use a card of a supported Speed Class. (Memory Cards That Can Be Used: 25)
• If the recording stops even when you are using a card that meets the specified
Speed Class rating, the data writing speed of the card is getting slow.
We recommend backing up data, and formatting. (Formatting Cards
(Initialization): 62)
Lens
[The lens is not attached properly. Do not push lens release button
while lens is attached.]
•
Remove the lens once, and then attach it again without pressing the lens release
button. (Attaching a Lens: 63)
Turn on the camera again, and if it is still displaying, contact the dealer.
[Lens attachment failed. Please make sure the lens is attached
correctly.]
•
Remove the lens from the camera body and gently wipe the contacts on the lens and
the camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the
dealer.
To Next Page
Loading...
Need help?
General
