46
Recording
DVQX1391 (ENG)
Correcting jitter
The camera can activate either the In-Lens Image Stabiliser or In-Body Image
Stabiliser, or it can activate both of them and reduce jitter even more effectively.
(Dual I.S.)
For motion picture recording, you can use the 5-Axis Hybrid Image Stabiliser,
which makes use of the In-Lens Image Stabiliser, In-Body Image Stabiliser, and
Electronic Image Stabiliser.
• The image stabilisers to be activated differ depending on your lens. The icon for
the currently activated image stabiliser is displayed on the recording screen.
When taking
pictures
When recording
motion pictures
Panasonic lenses compatible with Dual I.S.
(Based on the Micro Four Thirds System
standard)
• For the latest information on compatible
lenses, please refer to our website.
• If [
], [ ] or [ ] is not displayed even
when a compatible lens is used, update the
lens firmware to the latest version. (→14)
Lens + Body
(Dual I.S.) (
/ )
Lens + Body
(Dual I.S.) (
),
5-Axis Hybrid (
)
Lenses compatible with the image stabiliser
function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
Lens or Body
(
/ )
Lens or Body (
),
5-Axis Hybrid (
)
Lenses not compatible with the image
stabiliser function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
Body (
/ )
Body (
),
5-Axis Hybrid (
)
When using a Leica lens mount adaptor
(optional) or mount adaptor made by another
manufacturer
When [E-Stabilization (Video)] is set to [ON]
Recording mode:
• When using an interchangeable lens with [O.I.S.] switch (such as H-FS14140),
stabiliser function is activated if the [O.I.S.] switch of the lens is set to [ON].
([
] is set at the time of purchase)
→ [Rec] / [Motion Picture] → [Stabilizer]
To Next Page
Loading...
Need help?
General
