Panasonic Lumix DC-TZ95 User Manual

20
Preparations
Charging battery
Inserting the battery
To charge the battery, insert it into the camera.
1
Slide the release lever to the [OPEN]
position and open the card/battery door
Release lever
[OPEN] [LOCK]
2
Insert the battery all the way
• Insert the battery all the way firmly and check
that it is locked by lever.
3
Close the card/battery door and then
slide the release lever to the [LOCK]
position
Make sure to insert the battery in the correct
orientation.
Lever
■
To remove battery
Move the lever in the card/battery
compartment in the direction of the arrow.
●
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
To remove the battery, turn the camera off and wait until the LUMIX indicator on the screen goes
off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded
data.)
●
Remove battery from camera after use.

Panasonic Lumix DC-TZ95 Specifications

General

Effective Pixels	20.3 megapixels
Optical Zoom	30x
Lens	LEICA DC VARIO-ELMAR
LCD Screen Resolution	1, 040, 000 dots
Connectivity	Wi-Fi, Bluetooth
Dimensions	112.0 x 68.8 x 41.6 mm
Digital Zoom	4x
Touch Screen	Yes
Built-in Flash	Yes
Sensor Type	MOS
Focal Length	4.3 - 129mm (24 - 720mm in 35mm equivalent)
Maximum Aperture	F3.3 - F6.4
ISO Sensitivity	80 / 100 / 200 / 400 / 800 / 1600 / 3200 / 6400
Image Stabilization	5-Axis HYBRID O.I.S.+
Display	3.0-inch TFT Screen LCD
Viewfinder	0.21" LVF (Live View Finder)
Video Recording	4K video at 30p
Battery	Lithium-ion (7.2V, 1025mAh)