233
Wi-Fi/Bluetooth
Connecting the camera to a smartphone
You can remotely operate the camera using a smartphone.
The “Panasonic Image App” (hereafter “Image App”) must be installed on your
smartphone.
Installing the smartphone/tablet app “Panasonic Image App”
Supported OS Android™: Android 4.4 or later
(Android 5.0 or higher is required to use the Bluetooth
function)
iOS: iOS 9.3 or later (The Bluetooth function cannot be used with the iPad 2)
Installation
procedure
Connect your device to a network
(Android) Select “Google Play™ Store”
(iOS) Select “App Store”
Enter “Panasonic Image App” or “LUMIX” into the search box
Select “Panasonic Image App” and install it
• Use the latest version.
• Supported OS versions as of March 2019. Supported OS versions may be changed
without prior notice.
• The service may not be able to be used properly depending on the type of smartphone
being used.
For the latest information on the “Image App”, refer to the support site below.
https://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)
• When downloading the app on a mobile phone network, high packet communication
fees may be incurred depending on the details of your contract.
• For details about the operating procedure, etc., refer to [Help] in the “Image App” menu.
• When you operate the “Image App” on the smartphone that is connected to the
camera via Wi-Fi, [Help] in the “Image App” may not be displayed depending on the
smartphone. In this case, after terminating the connection to the camera, reconnect the
smartphone to a mobile phone network or to a Wi-Fi router, and then display [Help] in
the “Image App”.
• Some of the screens and information provided in this document may be different
depending on the supported operating system and “Image App” version.
To Next Page
Loading...
Need help?
General
