Name: Panasonic Lumix DC-TZ95
Brand: Panasonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

251

Wi-Fi/Bluetooth

Displaying still pictures on a TV

You can display still pictures on a TV that is compatible with a DLNA (DMR) function.

→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]

→ [Playback on TV]

Select [Via Network] or [Direct] to connect (→267, 270)

Select the device you wish to connect to

• When the connection is established, the screen is displayed.

Take or play back still pictures on this unit

• To terminate the connection, follow the steps below:

→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes]

(You can also close the connection by pressing the [Wi-Fi] button.)

●

When you display the pictures on a TV using the Wi-Fi function, they are not output using 4K

resolution. To output pictures using 4K resolution, connect this unit to the TV using an HDMI micro

cable. (→275)

●

When a TV is connected to this unit, the TV screen may temporarily return to the status before the

connection. Pictures are displayed again when you take or play back pictures.

●

Even if [Effect] and [Sound] are set on this unit, these settings are disabled when the pictures are

played back on a TV during Slide Show playback.

●

Motion pictures and 4K burst files cannot be played back.

●

The pictures displayed on “Multi Playback” screen or some screens of the camera are not

displayed on the TV.

●

When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.

Panasonic Lumix DC-TZ95 Specifications

General

Panasonic Lumix DC-TZ95 User Manual

Questions and Answers: