Panasonic Lumix DC-TZ95 User Manual

230
Wi-Fi/Bluetooth
Wi-Fi/Bluetooth Function
■
Before Use
• Complete the date and time settings in advance. (→29)
• To use the Wi-Fi function on this unit, a wireless access point or a destination device
equipped with the wireless LAN function is required.
■
Lighting of the WIRELESS connection lamp (Blue)
Lit: When the Wi-Fi/Bluetooth function is ON or
connected
Blinking: When sending picture data
• In [Wireless Connection Lamp] in the [Setup] menu,
you can set the lamp so that it will not light/flash.
(→202)
■
[Wi-Fi] button
In this Operating Instructions, a function button to which [Wi-Fi] is assigned is referred
to as the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to [Fn5] button in
recording mode, and [Fn1] in playback mode.)
• For details on the function button, refer to (→48).
To start up the Wi-Fi function (When in recording mode):
Touch [ ]
Touch [ ]

Panasonic Lumix DC-TZ95 Specifications

General

Effective Pixels	20.3 megapixels
Optical Zoom	30x
Lens	LEICA DC VARIO-ELMAR
LCD Screen Resolution	1, 040, 000 dots
Connectivity	Wi-Fi, Bluetooth
Dimensions	112.0 x 68.8 x 41.6 mm
Digital Zoom	4x
Touch Screen	Yes
Built-in Flash	Yes
Sensor Type	MOS
Focal Length	4.3 - 129mm (24 - 720mm in 35mm equivalent)
Maximum Aperture	F3.3 - F6.4
ISO Sensitivity	80 / 100 / 200 / 400 / 800 / 1600 / 3200 / 6400
Image Stabilization	5-Axis HYBRID O.I.S.+
Display	3.0-inch TFT Screen LCD
Viewfinder	0.21" LVF (Live View Finder)
Video Recording	4K video at 30p
Battery	Lithium-ion (7.2V, 1025mAh)