Advanced (Playback)
- 86 -
You can stamp the recording date/time, name, location or travel date onto the recorded
pictures.
It is suitable for regular size printing. (Pictures with a Picture Size larger than [ ] will be
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] Mode menu. (P20)
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Press 3/4 to select text stamp items, and then press 1.
Press 3/4 to select the settings, and then press [MENU/SET].
[TEXT STAMP]
Select the picture, and then press
[MENU/SET] to set.
•[‘] appears on screen if the picture is
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
• The setting is canceled when [DISPLAY]
is pressed again.
[SINGLE] [MULTI]
Press 2/1 to
select the picture.
Press 3/4/2/1 to
select the pictures.
Item Setting item
[SHOOTING DATE]
[OFF]
[W/O TIME]:
Stamp the year, month and date.
[WITH TIME]: Stamp the year, month, day, hour and minutes.
[NAME]
[OFF]
[]
(BABY/PET):
Stamps names registered in name settings for
[BABY1]/[BABY2] or [PET] in Scene Mode.
[LOCATION]
[OFF]
[ON]:
Stamps the travel destination name set under
[LOCATION].
[TRAVEL DATE]
[OFF]
[ON]: Stamps the travel date set under [TRAVEL DATE].
To Next Page
Loading...
