EasyManua.ls Logo

Panasonic Lumix DMC-FP3

Panasonic Lumix DMC-FP3
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18 VQT2P49 VQT2P49 19
Using [SETUP] menu
For details about the setting procedure in the [SETUP] menu. (15)
[CLOCK SET]
Set the date and time.
(13)
Set time, date, and display format.
[WORLD TIME]
Set the local time at
travel destination. (54)
[DESTINATION]: Set the local time at travel destination.
[
HOME]: Set date and time at home area.
[TRAVEL DATE]
Record the number of
days elapsed in your
travels. (53)
[TRAVEL SETUP]
[OFF]/[SET] (Register departure and return dates.)
[LOCATION]
[OFF]/[SET] (Input name of destination.) (63)
[BEEP]
Change or mute the
beep/shutter sounds.
[BEEP LEVEL]
/ / : Mute/Low/High
[BEEP TONE]
/ / : Change beep tone.
[SHUTTER VOL.]
/ / : Mute/Low/High
[SHUTTER TONE]
/ / : Change shutter tone.
[VOLUME]
Adjust volume of sound
from speakers (7 levels).
0 • • [LEVEL3] • • [LEVEL6]
Cannot be used to adjust TV speaker volume when
connected to TV. (We recommend setting camera
volume to 0)
Item Settings, notes
For details about the setting procedure in the [SETUP] menu. (15)
Make general camera settings such as adjusting the clock, extending the battery life, and
changing the beep sounds.
[CLOCK SET], [AUTO REVIEW] and [AUTO POWER OFF] are important for clock
setting and battery life. Please check these before use.
[LCD MODE]
Make LCD monitor easier
to see.
[OFF]: Normal (cancel setting)
[AUTO POWER LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
[POWER LCD]:
Makes screen brighter than normal (for outdoor use).
[HIGH ANGLE]:
Makes screen easier to see when taking pictures from
high positions. (becomes harder to see from the front)
[AUTO POWER LCD] is disabled in the following situations.
During Playback Mode or menu screen display, or when
connected to computer/printer.
[POWER LCD] will be deactivated if no operations are performed
for 30 seconds while recording. (Brightness can be restored by
pressing any button)
[HIGH ANGLE] will be canceled when power is turned off
(including [AUTO POWER OFF]).
Brightness/color of screen in [LCD MODE] has no effect on
pictures recorded.
Block out sunlight (with hand, etc.) if reflection makes screen
difficult to see.
[AUTO POWER LCD] and [HIGH ANGLE] are not available in
Playback Mode.
Selecting [AUTO POWER LCD] or [POWER LCD] will reduce the
number of pictures available and battery life.
[FOCUS ICON]
Change the focus icon.
/ / / / /
Item Settings, notes

Table of Contents

Other manuals for Panasonic Lumix DMC-FP3

Related product manuals