- 31 -
Basic
Note
• Use a card with SD Speed Class with “Class 6” or higher when recording motion pictures.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• Following functions operate automatically in the Motion Picture Mode.
– [ ] in [AF Mode]/[Stabilizer]
• [Digital Zoom] or [AF Assist Lamp] cannot be setup in the Motion Picture Mode. Settings from
other [Rec] mode are used.
• When motion pictures recorded with the camera are played back on other equipment,
the quality of the picture and sound may deteriorate and it may not be possible to play
them back. Also the recording information may not be displayed correctly.
• It is recommended to use a fully charged battery or AC adaptor (optional) and DC coupler
(optional) when recording motion pictures.
• If while recording motion pictures using the AC adaptor and the power supply is cut off due to a
power outage or if the AC adaptor is disconnected etc., the motion picture being recorded will
not be recorded.
• Sound of operation may be recorded when button or other operations are performed during
motion picture recording.
To Next Page
Loading...
Need help?
General
