Playback/Editing
- 98 -
You can copy the data of the pictures you have taken from the built-in memory to a card or
from a card to the built-in memory.
Select [Copy] on the [Playback] Mode menu. (P35)
Press 3/4 to select the copy destination and then press
[MENU/SET].
(When [ ] is selected) Press 2/1 to select the picture and then
press [MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Do not turn the camera off at any point during the copying process.
Note
• If a picture exists with the same name (folder number/file number) as the picture to be copied in
the copy destination when [ ] is selected, a new folder is created and the picture is copied.
If a picture exists with the same name (folder number/file number) as the picture to be copied in
the copy destination when [ ] is selected, that picture is not copied.
• It may take time to copy the picture data.
• [Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after
copying is finished.
[Copy]
:
All the picture data in the built-in memory are copied onto the card at one time.
:
One picture at a time is copied from the card to the built-in memory.
To Next Page
Loading...
Need help?
General
