Recording
- 82 -
For details on [Rec] Mode menu settings, refer to P35.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
·¿
[ON]/[OFF]
Note
• The stabilizer function may not be effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In Digital Zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [ON] in [Self Portrait] in Scene Mode.
• The setting is fixed to [OFF] in [Starry Sky] in Scene Mode.
For details on [Rec] Mode menu settings, refer to P35.
You can take a picture with date and time of recording.
Applicable modes:
·¿
Note
• Date information for pictures recorded with the [Date Stamp] set cannot be deleted.
• When printing pictures with [Date Stamp] at a shop or with a printer, the date will be
printed on top of the other if you choose to print with the date.
• Date information cannot be stamped into the pictures recorded without setting the clock.
• It cannot be set when [Panorama Assist], [Hi-Speed Burst] or [Flash Burst] of the Scene Mode
or [Burst] of the [Rec] menu is set.
• [Text Stamp], [Resize], and [Cropping] cannot be set for pictures recorded with [Date Stamp]
set.
• Even if you take a picture with [Date Stamp] set to [OFF], it is possible to stamp dates onto the
recorded pictures using [Text Stamp] (P90) or setup the Date print (P96, 105).
For details on [Rec] Mode menu settings, refer to P35.
Note
• Refer to P19 for details.
[Stabilizer]
[Date Stamp]
[W/O TIME] Stamp the year, month, and day.
[WITH TIME] Stamp the year, month, day, hour, and minutes.
[OFF]
—
[Clock Set]
To Next Page
Loading...
Need help?
General
