VQT1M59
58
Advanced (Recording pictures)
For details on the [SETUP] menu settings, refer to P19.
You can display the local times at the travel destinations and record them on the pictures
you take.
•
Select [CLOCK SET] to set the current date and time in advance. (P16)
Note
•
Return the setting to [HOME] when the vacation is finished by performing steps 1, 2 and 3.
• If [HOME] is already set, change only the travel destination, and use.
Recording Dates/Times at Overseas Travel Destinations (World Time)
Select [WORLD TIME] from the [SETUP] menu,
and then move 1.
• When first using the camera after purchasing it, the
[PLEASE SET THE HOME AREA] message appears.
Press [MENU/SET], and set the home area on the screen in
step
3.
Move 4 to select [HOME], and then press
[MENU/SET].
Move 2/1 to select the home area, and then
press [MENU/SET].
A Current time
B Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [ ] is used at the home area, move
3. Move 3 again to return to the original time.
• The daylight saving time setting for the home area does not
advance the current time. Advance the clock setting by one
hour.
Move 3 to select [DESTINATION] and then press
[MENU/SET] to set.
C Depending on the setting, the time at the travel destination
area or the home area is displayed.
Move 2/1 to select the area the travel
destination is in and then press [MENU/SET] to
set.
D Current time of the destination area
E Time difference
• If daylight saving time [ ] is used at the travel destination,
move 3. (The time advances by one hour.) Move 3 again to
return to the original time.
Press [MENU/SET] to close the menu.
1
2
3
A
B
4
C
5
E
D
6
VQT1M59_ENG.book 58 ページ ２００８年１月８日 火曜日 午後５時２１分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
