VQT1M59
74
Advanced (Playback)
∫ Delete the title (for [SINGLE] only)
1 In step 4 when [SINGLE] (P73) is selected, delete all the texts, select [EXIT], and
press [MENU/SET].
2 Press [‚].
3 Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.
• The name setting of [BABY1]/[BABY2] or [PET] in scene mode can also be registered by using
the operation in steps
4 and following.
• The name setting of [BABY1]/[BABY2] or [PET] in scene mode and [TITLE EDIT] cannot be
registered at the same time.
• You can print out texts (comments) using the “PHOTOfunSTUDIO-viewer-” bundled software on
the CD-ROM (supplied).
• You can set up to 50 pictures at one time with [MULTI].
• You cannot use titles edit for pictures taken with other equipment.
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P19)
Move 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Move 3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE]
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[TEXT STAMP]
Select the picture, and then
press [MENU/SET] to set.
• [‘] A appears on screen if the
picture is stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET] to set.
•
The setting is canceled when
[DISPLAY] is pressed again.
[SINGLE] [MULTI]
Move 2/1 to select
the picture.
Move 3/4/2/1 to
select the pictures.
[W/OTIME]: Stamp the year, month and date.
[WITHTIME]: Stamp the year, month, day, hour and minutes.
1
2
3
A
4
VQT1M59_ENG.book 74 ページ ２００８年１月８日 火曜日 午後５時２１分
To Next Page
Loading...
