29
VQT1W65
Basic
It is possible to set the focus to the specified subject. Focus will keep following the subject
automatically even if it moves.
1 Move 3.
• [ ] is displayed in the upper left of the screen.
• AF Tracking frame is displayed in the center of the
screen.
• Move 3 again to cancel.
2 Bring the subject to the AF tracking frame, and
move 4 to lock the subject.
• AF tracking frame will turn yellow.
• An optimum scene for the specified subject will be
chosen.
• Move 3 to cancel.
•
When [
‡
] is selected, [ ], [ ] or [ ] is set depending on the type of subject and brightness.
• When [ ] or [ ] is set, the flash is activated twice.
• Only the following functions can be set in this mode.
[REC] mode menu
– [PICTURE SIZE]
¢
(P59)/[BURST] (P65)/[COLOR MODE]
¢
(P66)
¢ The settings which can be selected are different from when other [REC] modes are used.
[SETUP] menu
– [CLOCK SET]/[WORLD TIME]/[BEEP]/[LANGUAGE]
• The settings of the following items are fixed.
• The following functions cannot be used.
– [AUTO LCD OFF]/[EXPOSURE]/[AUTO BRACKET]/[DIGITAL ZOOM]
• The other items on the [SETUP] menu can be set in a mode such as the Normal picture mode.
What is set will be reflected in the Intelligent auto mode.
AF Tracking Function
About the flash
Settings in Intelligent auto mode
Item Settings
[ECONOMY]
([POWER SAVE]) (P23)
[5MIN.]
[AUTO REVIEW] (P23) [2SEC.]
Flash (P38) ‡/Œ
Self-timer (P42) 10 seconds/off
[QUALITY] (P60) A
[INTELLIGENT ISO] (P61)
[WHITE BALANCE] (P62) [AWB]
[I.EXPOSURE] (P63) [ON]
[AF MODE] (P63) š (Set to [ ] when a face cannot be detected)
[STABILIZER] (P66) [AUTO]
[AF ASSIST LAMP] (P67) [ON]
ISOMAX
1600
DMC-FS25PPC-VQT1W65_eng.book 29 ページ ２００９年１月２２日 木曜日 午前１１時６分
To Next Page
Loading...
Need help?
General
